"SETU( TABLE )- 2 FT X 2.5 FT X 2.5 FT- The Executive table considered is with MODULA Desking system structure . The Legs are made up of 1.5 mm thick CRCA Pipe section of size 20 mm x 20 mm with powder coated finish upto 50 microns. The Legs are connected with the Beams with patented Aluminium Die casted connectors . The table top is made up of 18 mm thick PLPB with both side laminate. The edges of the table top are covered with 2 mm thick PVC edge banding with hot melt glue. The table top is provided with necessary metal inserts for long life." "AMU-MB( CHAIR )- AMU-MB MEDIUM BACK CHAIRS Nylon base with nylon castors Adjustable handles ( 3D) with PP pad Single Locking Synchronized moment of back and seat A 2 to 1 ratio and pivot point under the front edge of seat. Pivotal pressure point of backrest provides full support in upright and any reclining posture . Tilt lock in multiple position and has reclining angle of 160 the reclining tension of backrest can easily be adjusted to a body weight ranging from 65 to 115 kg by a small and unobtrusive tension knob at the bottom of the mechanism. It also come with an anti-shock device to prevent the backrest from hitting the sitter while unlocking the mechanism. All adjusting elements ae eassy to handle and accessible in each sitting posture. 15 mm ply with water fall edges with High pressure PU Moulded foam and upholstered with approved Fabric/ Leathrite. PP Plastic injection seat shells connected by 4 nos of self tapping screws.Common mounting opening ready with M6 nut for all different type of mechanisms, arms and backbones. PP Fiber glass filled injection moulded shell and backbone connector connected by using flexible nylon glass filled clip 4mm steel plate insert for the backbone connector reinforcement 6 nos of M6 insert nuts for connection. Seat - Fabric Back - Mesh Class IV Gas Lift with height adjustment between approximately 280 and 395 mm. It supports a weight capacity of 160 kg. With Black frame."